ENOC Lubricants

PROTEC FLEX ENERGY SN

It is 100 % fully synthetic engine oil, formulated with new friction modifier to enhance fuel economy.
Fortified with Low SAP additive chemistry to limit sulphated ash and special type ZDP based chemistry for better phosphorous retention.
New active cleaning agent is added to control turbocharger coking. It is also formulated with emulsion stablizer for bio fuel use.

PROTEC FLEX ENERGY SN is certified API SN and ILSAC GF-5 and GM dexos1 approved for SAE 5W- 30.
It is available in SAE 0W-20 viscosity grade to provide maximum fuel saving and to meet long drain requirements. Compatible to all
vehicles running on lead free gasoline,ethanol, LPG and CNG.

PROTEC FLEX ENERGY SN provides:
 Low friction formula helps improve fuel mileage.
 Excellent Piston / Rings cleanliness which increase engine and oil life.
 Enhance seal protection which result in reduction in oil leakage.
 Minimize corrosion due to stop-start driving.
 Bio Fuel usage.
 Enhance After Treatment Devices(ATD) protection.
 Control high temperature oxidation and deposits.
 Helps prevent sludge and other damaging deposits.

ENOC PROTEC X-TREME SN

ENOC PROTEC X-TREME SN is a high technology fully synthetic lubricant for the latest model passenger cars requiring performance
specification API SN developed to provide maximum protection for all passenger cars, including high performance cars and cars with
low emission engines with catalytic converts fitted to the vehicles. It is available as a SAE 5W-40 viscosity grades to provide maximum
fuel saving and to meet long drain requirements. Compatible for all cars running on lead free gasoline.

PROTEC X-TREME SN meets and exceeds the following International specifications:
API SN/CF
ACEA A3-04, B3-04, B4-04
VW 502.00/505.00 , PSA Peugeot Citroen OPEL GM –LL-025 , MB 229.3/ 229.5 , BMW Longlife Oil-01
Porsche Cars A40 , Renault RN700/RN710

PROTEC X-TREME SN provides:
 The highest level of engine protection for all manufacturers
 Extended engine life
 Superior resistance to oil thickening
 Excellent protection against wear
 Suitable for low emission engines
 Excellent low temperature easy starting

ENOC PROTEC ULTRA PLUS

ENOC PROTEC ULTRA PLUS is specially formulated using latest additive technology and synthetic blend lubricant base oil technology
suitable for modern passenger car gasoline & diesel light duty engines exceeding the performance specification API SN as well as meeting
the latest ACEA A3/B3 specifications & key OEM requirements.
Developed to provide maximum protection for modern passenger cars, including low emission engines and high performance vehicles.
It provides comfort in driving and meeting long drain requirements for passenger cars with gasoline/diesel engines. Compatible for all cars
running on turbocharger, gasoline direct injection and diesel biofuels.

PROTEC ULTRA PLUS meets and exceeds the following International specifications:
Approved API SN
ACEA A3/B3
MB Approval 229.1
Renault RN 0700

PROTEC ULTRA PLUS provides:
 The highest level of engine protection for all manufacturers
 Extended engine life
 Superior resistance to oil thickening
 Excellent protection against wear
 Low oil consumption and engine deposits
 Suitable for low emission engines.

ENOC PROTEC PREMIUM

ENOC PROTEC PREMIUM is a modern high technology based gasoline engine oil exceeding the latest API SL performance specification.
Developed to provide maximum protection for use in modern passenger cars including low emission engines and high performance vehicles.
It is suitable for all types of driving conditions (city, highway and harsh) and is available in a range of SAE viscosity grades, to meet market
conditions. Compatible for all cars running on lead free gasoline and catylitic converters.

PROTEC PREMIUM meets and exceeds the following International specifications:
API SL/CF, SJ, SH
ACEA A2-98/2, B2-98/2

PROTEC PREMIUM provides:
 The highest level of engine protection for all manufacturers
 Extended engine life
 Superior resistance to oil thickening
 Excellent protection against wear
 Low oil consumption and engine deposits
 Easy all year round starting

ENOC ACTIVE SYN OEM

ENOC ACTIVE SYN OEM is a 100% synthetic automatic transmission fluid designed specifically for use in passenger cars, commercial
vehicles and Off-Highway automatic transmission with outstanding performance in American, Japanese, Korean and European equipments.
ACTIVE SYN OEM provides the excellent friction durability and anti-shudder performance required by ASIAN transmission manufacturers.

ACTIVE SYN OEM is suitable for the following OEM and International specifications:
GM DEXRONIIIH, Ford Mercon V, Allison TES-295, Allison C4, MB Approval 236.6,
MAN 339 Type V-1, V-2, Type Z-1, Z-2 and Z-3, Voith H55.6335,
Volvo 97341, ZF TE-ML 02F, 04D, 05L, 11A, 11B, 14A, 14B, 14C, 16L, 16M, 17C, 20C,
JASO 1-A, Audi: G 055 025 A2, BMW: ETL-7045E, Chrsler ATF +3/4, Ford FNR5,
Honda Z-1, Hyundai SP-III, Mazda ATF M III, ATF-MV, Mitsubishi Diamond SP-III, Nissan N402, Toyota T-IV,
Toyota WS (JWS 3324) can be used outside warranty

ACTIVE SYN OEM provides:
 Suitable for multi vechicle Automatic Transmission
 Excellent friction durability and anti-shudder performance
 Extended long drain intervals
 Very good low temperature fluidity

ENOC ACTIVE CVT

ENOC ACTIVE CVT is 100% Fully Synthetic high performance Continuously Variable Transmission fluids suitable for use in Japanese,
American, Korean and European CVT’s of push-belt and pull-chain designed transmissions. It is aslo suitable for use in wet clutch CVT’s.
ACTIVE CVT provides smoother, consistent all weather step-less shifting.It has an all-around lubrication protection of the transmission
components to help extend the transmission life and provides a smoother driving experience.

ACTIVE CVT is suitable for use in the following OEM vehicles as a CVT fluid:
Audi/ VW TL 52180; G 052 180, DAIHATSU TC, FORD CVT 30/ CVT 23, HYUNDAI/ KIA SP III, HONDA HMMF,
SUZUKI TC/ NS- 2, TOYOTA TC, DODGE CALIBER NS- 2, NISSAN NS- 2, GM/ SATURN DEX- CVT,
MITSUBISHI CVT- J1/ SP- III, MERCEDES BENZ 236.20

ACTIVE CVT provides:
 Excellent protection metal-on-metal protection between Belt and Pulley
 Metal Anti-wear on pull-chain CVTs
 Good shear stability, anti-foaming and anti-wear
 Good performance on high torque applications
 Excellent thermal and oxidation stability or consistent transmission performance.
 Compatability with all common seal materials helping control the leakage.
 Effective foam control properties that will provide consistent shifting performance.
 Excellent low temperature fluidity

ENOC ZENON ULTRA PLUS

ENOC ZENON ULTRA PLUS fluids are superior quality multigrade gear and transmission oils suitable for cars, trucks, construction plant
and other mobile equipment. They provide long life by offering a high degree of resistance to gear wear and scuffing. Non scheduled
maintenance work can be reduced due to the minimising of premature gear failures and deposit formation on bearings, working surfaces
and seals which can lead to leakage. They contain balanced extreme pressure chemical technology designed to minimise scuffing and
scoring of gear surfaces despite high speed, high torque and shock operation.

ZENON ULTRA PLUS meets and exceeds the following OEM and International specifications:
API GL-5
US Military MIL-L-2105D
MAN 342 Type M1 & M2
ZF TE-ML 05A,07A, 12E, 16B, 16C, 16D, 17B, 19B, and 21A

ZENON ULTRA PLUS provides:
 The opportunity to rationalise gear and transmission oils
 High load carrying capacity
 Superior oxidation resistance
 Long service life
 Excellent low temperature performance
 Wide temperature of operation

ENOC ULTRA BRAKE FLUID

ENOC ULTRA BRAKE FLUID is a high quality synthetic brake and clutch fluid conforming to the DOT4 specification and based on
polyglycol type fluid that is a high performance standard used in worldwide automotive brake equipment.

ULTRA BRAKE FLUID meets and exceeds the following International specifications:
FMVSS 116 DOT 4
SAE J-1703
ISO 4925 and NFR 12640.

ULTRA BRAKE FLUID provides:
 Very High wet boiling point
 Excellent low-temperature stability
 High temperature viscosity performance
 Excellent corrosion protection
 Compatibility with different rubber seals
 Excellent thermal stability in high performance braking conditions

ENOC EN-COOL EXTRA

ENOC EN-COOL EXTRA is a superior quality engine coolant formulated from high purity monoethylene glycol and organic acid carboxylate
technology corrosion inhibitors with proven heat transfer performance. It provides excellent corrosion protection for all metals in cooling
systems of gasoline and diesel engines, especially the principle metals, iron, copper and aluminium. It is available diluted with de-ionised
water at 33% and 50% concentrations of EN-COOL EXTRA coolant. EN-COOL EXTRA is free from potentially harmful additives such as
nitrites, amines and phosphates and as such contributes to a safer environment.

EN-COOL EXTRA COOLANT meets and exceeds the following International Standards:
BS 6580 (2010)
ASTM D 3306

EN-COOL EXTRA provides:
 Excellent engine cooling and protection against boiling in summer heat.
 Superior anti-corrosion performance, particularly with aluminium and additives remain effective for a long duration Hard water
stability thanks to absence of silicates and phosphates
 Compatibility with rubber and sealing materials
 No harmful nitrites, amines or phosphates.
 Effective protection against frost in freezing winter conditions, depending on concentration

ENOC ENAYA GASOLINE INJECTOR CLEANER

ENOC ENAYA GASOLINE INJECTOR CLEANER is a super ashless detergent product that uses an ENOC technologically- advanced
formula to remove injector and valves deposits which helps restore fuel combustion performance. ENOC ENAYA Gasoline Injector Cleaner
also consist a powerful friction modifier to reduce upper cylinder friction thus enhancing overall fuel economy.

ENOC ENAYA GASOLINE INJECTOR CLEANER is a powerfull cleaning agent which removes existing fuel intake system and valves
deposits. It is recommended one bottle per tank for keep clean and 2 bottles for clean up process.

KEY BENEFITS:
 Smooth rough idle and eliminate tough starts
 Reduce combustion chamber deposits
 Reducing upper cylinder friction, thus restoring lost fuel efficiency
 Reduces white and black smoke
 Bio fuel compatibilty

ENOC ENAYA DIESEL INJECTOR CLEANER

ENOC ENAYA DIESEL INJECTOR CLEANER is a super ashless detergent with cetane booster product that uses an ENOC technologically-
advanced formula to remove injector and valves deposits which helps restore fuel combustion performance. ENOC ENAYA Diesel Injector
Cleaner also consist a powerful cetane booster to enhance combustion process and reduce emissions, ultimately improving diesel fuel
economy.

ENOC ENAYA DIESEL INJECTOR CLEANER is a powerfull cleaning agent which removes existing fuel intake system and valves deposits.
It also boosts Cetane number 4 to 6 . It is recommended one bottle per tank for keep clean and 2 bottles for clean up process.

KEY BENEFITS:
 Smooth rough idle and eliminate tough starts
 Reduce combustion chamber deposits
 Reduce emission gases
 Reduces white and black smoke
 Bio fuel compatibilty

ENOC VULCAN 770X

ENOC VULCAN 770X is a Super High Performance long drain diesel engine oil meeting the latest API CI-4 standard available in a shear stable
viscosity grade. This lubricant has been developed as a long life oil meeting Mercedes Benz 228.3 and Volvo VDS-3 long oil drain specifications.
VULCAN 770X offers the excellent performance for fleet operators wanting long engine life in modern long haul diesel trucks operating with low
emission engine standards meeting Euro 4 and for extended drain periods. The product is manufactured with mineral base API approved
base oils and imparted with chemical additives qualifying API CI-4/ SL.

VULCAN 770X meets and exceeds the following OEM and International Specifications:
API CI-4/SL Renault RVI RLD/RLD-2
ACEA E7 Cummins 20076/20077 and 20078
Mercedes Benz 228.3 MAN M 3275, Volvo VDS-3 Caterpillar ECF- 2, MACK EO-N MTU Type 2,
Global DHD-1 Deutz DQC III-10, Detroit Diesel DDC 93K215

VULCAN 770X provides:
 Excellent engine cleanliness through advanced soot handling technology
 Mixed fleet capabilities
 Exceptional low engine wear
 Trouble free operation between long drain service intervals
 Reduced maintenance capabilities

PROTEC 4T X-TREME SN

ENOC PROTEC 4T X-TREME SN (Kawasaki) is a high technology fully synthetic lubricant for the latest model gasoline engine oil requiring
performance specification exceeding API SN Developed to provide maximum protection in new 4 stroke air cooled motor cycles including low
emission engines and for all vehicles. It is available in SAE 5W-40 viscosity grade to provide maximum fuel saving and to meet long drain
requirements. Compatible for all motor cycles running on lead free gasoline.

PROTEC 4T X-TREME SN (Kawasaki) meets and exceeds the following International specifications:
API SN/CF
ACEA A3-04, B3-04, B4-04
JASO MA

PROTEC 4T X-TREME SN (Kawasaki) provides:
 The highest level of engine protection for all manufacturers
 Extended engine life
 Superior resistance to oil thickening
 Excellent protection against wear
 Suitable for low emission engines
 Excellent low temperature easy starting

PROTEC 4T ULTRA PLUS

ENOC PROTEC 4T ULTRA PLUS is a special formulation using semi-synthetic lubricant base oil technology suitable for modern four stroke
motor cycle engines oil exceeding the performance specification API SN. Developed to provide maximum protection for modern four stroke
motor cycle engines. It is available in SAE 10W-40 viscosity grade to provide fuel saving and to meet long drain requirements. Compatible for
all motor cycles running on lead free gasoline.

PROTEC 4T ULTRA PLUS meets and exceeds the following International specifications:
API SN/CF
ACEA A3/B3
JASO MA

PROTEC 4T ULTRA PLUS provides:
 The highest level of engine protection for all manufacturers
 Extended engine life
 Superior resistance to oil thickening
 Excellent protection against wear
 Suitable for low emission engines
 Excellent low temperature easy starting

PROTEC 4T PREMIUM

ENOC PROTEC 4T PREMIUM is a modern high technology based gasoline engine oil exceeding the latest API SL performance specification.
Developed to provide maximum protection for use in modern 4 stroke air cooled motor cycles including low emission engines and high
performance vehicles. It is suitable for all types of driving conditions (city, highway and harsh) and is available in SAE 10W- 30, SAE 10W- 40,
SAE 15W- 40 & SAE 20W- 50 viscosity grade, to meet market conditions. Compatible for all motor cycles running on lead free gasoline and
catylitic converters.

PROTEC 4T PREMIUM meets and exceeds the following International specifications:
API SL, SJ, SH
ACEA A2-98/2, B2-98/2
JASO MA – SAE 20W50, 15W40
JASO MB – SAE 10W40, MA2 – SAE 10W30

PROTEC 4T PREMIUM provides:
 The highest level of engine protection for all manufacturers
 Extended engine life
 Superior resistance to oil thickening
 Excellent protection against wear
 Low oil consumption and engine deposits
 Easy all year round starting

ENOC PROTEC 4T MAX

ENOC PROTEC 4T MAX is a modern high technology gasoline engine oil specifically formulated for Four-Stroke motor cycle engines available
in popular multigrades and meeting the API SF specification. In addition it meets the new JASO MA specification which has been developed to
meet the requirements for the engine and the wet clutch lubrication to provide smooth gear change operations

PROTEC 4T MAX meets and exceeds the following International specifications
API SF
JASO MA

PROTEC 4T MAX provides:
 Extended life by the use of special additive technology for engine and wet clutch operation
 Smooth gear changes by the use of special lubricant friction characteristics
 Reduced engine repairs due to the maintenance of cleaner engine parts
 Superior resistance to oil thickening and oxidation
 Excellent protection against wear
 Low engine deposits
 Easy all year round starting

PROTEC 4T SCOOTER

ENOC PROTEC 4T SCOOTER is a modern high technology engine oil ideal for high performance Scooter engines exceeding the latest
API SL performance specification. Developed to provide maximum protection for use in Scooter engines that requires to deliver high power,
high torque under stressful conditions. Protec Scooter 4T is suitable for all types of driving conditions (city, highway and harsh) and is available
in SAE 10W- 40 viscosity grade to meet market conditions. Compatible for all Scooter engines running on lead free gasoline and catylitic
converters.

PROTEC 4T SCOOTER meets and exceeds the following International specifications:
Exceed the requirements of all Japanese, European, Indian and Chinese Scooter manufacturer.
API SL
JASO MB

PROTEC 4T SCOOTER provides:
 Help protect and clean Scooters engines.
 Extended engine life.
 Superior resistance to oil thickening.
 Excellent protection against wear.
 Low oil consumption and engine deposits.
 Provides smoother gear changes and enchanced ride comfort.
 Reduces noise and vibration.